GND | Intellisystem Technologies

Showing all 11 results

IT-E232-PC

RS-232 to E1 Converter

IT-E232-PC interface converter supports the conversion between E1 interface which accord with the ITU-T G.703 standard and RS-232 interface, it can receive synchronous data of 2.048Mbps from E1 network, and transmit the data to ROUTER or other devices. The mode of interface is DCE, and it can be connected with DTE or DCE devices.

- Read more
IT-E485-PC

RS-485/422 to E1 Converter

IT-E485-PC interface converter supports the conversion between E1 interface which accord with the ITU-T G.703 standard and RS-485/422 interface, it can receive synchronous data of 2.048Mbps from E1 network, and transmit the data to ROUTER or other devices.
The mode of interface is DCE, and it can be connected with DTE or DCE devices.

- Read more
IT-SC422-TLC-25

Port-Powered RS232 to RS422 Converter

IT-SC422-TLC-25 is the interface converter between RS232 and RS422. It is powered from serial port (such as COM port of computer), no outside power needed. Small size, long transmission distance, high rate, stable performance. The IT-SC422-TLC-25 has a DB25 female connector on the RS232 side and either a DB25 male connector (or DB25M) on the RS422 side. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data serial conversion product.

- Read more
IT-SC422-TLC-9

Port-Powered RS232 to RS422 Converter

IT-SC422-TLC-9 is the interface converter between RS232 and RS422. It is powered from serial port (such as COM port of computer), no outside power needed. Small size, long transmission distance, high rate, stable performance. The IT-SC422-TLC-9 has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS422 side. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data serial conversion product.

- Read more
IT-SC485-TLC-25

Port-Powered RS232 to RS422 Converter

The IT-SC485-TLC-25 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Read more
IT-SC485-TLC-9

Port-Powered RS232 to RS485 Converter

The IT-SC485-TLC-9 is a bi-directional port-powered RS232 to RS485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers.

- Read more
IT-SC485C-SW

Port-Power RS232 to RS485/422 Converter

The IT-SC485C-SW is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485/RS422 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485C-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 5 bit terminal block on the RS485/RS422 side.

- Read more
IT-SC485GI-SW

Industrial Isolation RS232/485/422 Converter and Repeater

IT-SC485GI-SW Can use for RS485/422 repeater and RS232 to RS485/422 converter, but just use one function at same time. The product must have 12-36VDC power input, optic- electrical isolation more than 3KV. Have small volume, 3000m transfer distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is a best performance and price interface converter and Repeater.

- Read more
IT-SC485P

Optical Isolation RS232 to RS485/422 Converter

IT-SC485P is a high performance, more function RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt it self adapt interface technique, no use for setup switch.

- Read more
IT-SC485WA-SW

Port-Powered RS232 to RS-485 Converter

The IT-SC485WA-SW is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half-duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The IT-SC485WA-SW has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.

- Read more
IT-TLC703-PC

Balance to Unbalance Converter

IT-TLC703-PC is a G.703 balance to unbalance converter, it solved the signal convert problem between 75ohm copper shaft to 120 ohm, twisted-pair adopt IT-TLC703-PC, users can complete 75ohm copper shaft communication only use usually 120ohm twisted-pair copper shaft.

- Read more

Warning: Illegal string offset 'text' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 27

Warning: Illegal string offset 'text' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 28

Warning: Illegal string offset 'entities' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 32

Warning: Illegal string offset 'user_mentions' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 32

Warning: Illegal string offset 'entities' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 42

Warning: Illegal string offset 'hashtags' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 42

Warning: Illegal string offset 'entities' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 52

Warning: Illegal string offset 'urls' in /web/htdocs/www.intellisystem.it/home/Intellisystem/wp-content/themes/sportlife/includes/twitter_bar.php on line 52
T

Intellisystem Technologies

Intellisystem Technologies S.r.l. - © All Rights Reserverd 2003-2021